HPS 3D Printing Materials
Hybrid PhotoSynthesis · Axtra3D Lumia X1
HPS materials
Detailed resin parts at production speed, in the widest range of resins we print: engineering, flame-retardant, elastomer, true silicone and dental materials from nine makers.
We can print any material for these printers. Need one that isn't listed? Ask us.
All HPS materials 28
Tap any material for its overview, applications and key properties. Materials marked Full guide have their own page.
Engineering 15
- Figure 4 PRO-BLK 10Production black, rigid Full guide →
- Figure 4 HI TEMP 300-AMBOver 300 °C HDT Full guide →
Figure 4 MED-WHT 10Biocompatible rigid white
Rigid white, biocompatible-capable material. Autoclavable.
Common applications
- Surgical handles and tooling
- Medical parts that need rigidity and heat resistance
Key properties
- Tensile modulus
- 3,000 MPa
- HDT @ 0.45 MPa
- 102 °C
Typical values from the manufacturer. Ask us for the full data sheet.
Figure 4 Tough ClearClear, tough
Clear production plastic that keeps its clarity and resists yellowing over time.
Common applications
- Lighting covers and light guides
- Consumer packaging
- Small clear production parts
Key properties
- Tensile strength
- About 50 MPa
- Tensile modulus
- 1,800–2,100 MPa
Typical values from the manufacturer. Ask us for the full data sheet.
N3xtDimension N3D-FR512Flame retardant, UL94 V-0, UL Blue Card
Halogen-free, flame-retardant black resin. UL Blue Card certified on the Lumia X1.
Common applications
- Electrical connectors
- Electronics enclosures
- Transportation parts
Key properties
- Tensile strength
- 42 MPa
- Elongation at break
- 4.2%
- HDT @ 0.45 MPa
- 170 °C
- Flame rating
- UL94 V-0 at 0.8 mm
Typical values from the manufacturer. Ask us for the full data sheet.
INFINAM FR 4100 LTough flame retardant
Flame-retardant resin with ABS-like toughness and high elongation. Parts can be machined and polished.
Common applications
- Aerospace parts
- Automotive components
- Electronics housings
Key properties
- Flame rating
- UL94 V-0
Typical values from the manufacturer. Ask us for the full data sheet.
INFINAM ST 6100 LHigh strength, high HDT
High-strength resin with toughness, impact resistance and good chemical and thermal resistance.
Common applications
- Molds, models and tooling
- Aerospace, automotive and electronics components
Key properties
- Tensile strength
- 89 MPa
- Tensile modulus
- 3,200 MPa
- Elongation at break
- 6%
- HDT @ 0.45 MPa
- 120 °C
- Notched Izod
- 22 J/m
Typical values from the manufacturer. Ask us for the full data sheet.
Loctite 3D 3843Tough, impact resistant
Semi-flexible tough resin with moderate heat resistance and high impact strength. Machinable, with a good surface finish.
Common applications
- Jigs and fixtures
- Housings and covers
- Manufacturing aids
Key properties
- Tensile strength
- 51 MPa
- Tensile modulus
- 1,800 MPa
- Elongation at break
- 43%
- HDT @ 0.45 MPa
- 63 °C
- Notched Izod
- 53 J/m
- Shore hardness
- 67 D
Typical values from the manufacturer. Ask us for the full data sheet.
Loctite 3D IND249High temp, fine features
High-temperature, high-strength resin with fine feature resolution.
Common applications
- High-temperature parts
- Fine-feature components
- Complex geometries
Key properties
- Tensile strength
- 98 MPa
- Tensile modulus
- 3,300 MPa
- Elongation at break
- 5%
- HDT @ 0.45 MPa
- 115 °C
- Shore hardness
- 88 D
Typical values from the manufacturer. Ask us for the full data sheet.
Loctite 3D IND3380ESD safe, 190 °C HDT
Electrostatic-dissipative (ESD) resin with high accuracy, a smooth finish and strong chemical resistance.
Common applications
- Jigs and fixtures for electronics manufacturing
- High-temperature tooling
Key properties
- Tensile strength
- 50 MPa
- Tensile modulus
- 3,000 MPa
- Elongation at break
- 2%
- HDT @ 0.45 MPa
- 190 °C
- Shore hardness
- 86 D
Typical values from the manufacturer. Ask us for the full data sheet.
Loctite 3D IND3785Food contact, low migration, white
Rigid white, low-migration resin for short-term food and pharmaceutical contact. TPO- and CMR-free.
Common applications
- Dispensing, filling and packaging fixtures
- Short-term food and pharma contact parts
- Chemical-resistant parts
Key properties
- Tensile strength
- 58–62 MPa
- Tensile modulus
- 2,400–2,700 MPa
- Elongation at break
- 4–5%
- HDT @ 0.45 MPa
- 95–100 °C
- Shore hardness
- 75 D
Typical values from the manufacturer. Ask us for the full data sheet.
Ultracur3D RG 1100 BInjection-molding-like rigid
Rigid, polyurethane-based engineering resin comparable to injection-molding grades, with heat, chemical and long-term UV resistance.
Common applications
- Automotive connectors
- Exterior covers
- Brackets and housings
Key properties
- Tensile strength
- 70 MPa
- Tensile modulus
- 2,950 MPa
- Elongation at break
- 5%
- HDT @ 0.45 MPa
- 100 °C
Typical values from the manufacturer. Ask us for the full data sheet.
Ultracur3D RG 3280Ceramic filled, over 280 °C HDT
Rigid resin with a high loading of ceramic particles. Very stiff and heat resistant, with a ceramic-like look and feel.
Common applications
- Tooling and molding
- Wind tunnel models
Key properties
- Tensile modulus
- About 10,000 MPa
- HDT
- Above 280 °C
Typical values from the manufacturer. Ask us for the full data sheet.
Ultracur3D ST 45 BTough, casting molds
Tough urethane resin with high elongation.
Common applications
- Casting molds
- Tough functional prototypes
- End-use parts
Key properties
- Tensile strength
- 52.5 MPa
- Tensile modulus
- 2,040 MPa
- Elongation at break
- 21%
- HDT @ 0.45 MPa
- 63 °C
- Notched Izod
- 21 J/m
Typical values from the manufacturer. Ask us for the full data sheet.
Spot-A FunctionalCeramic filled, machinable tooling
Stiff, tough, thermally resilient resin with low shrinkage. Parts can be machined.
Common applications
- Machinable tooling parts
- Enclosure design
- High-speed prototyping
Key properties
- Tensile strength
- 30 MPa
- Tensile modulus
- 1,681 MPa
- Elongation at break
- 2.5%
- Shore hardness
- 85 D
Typical values from the manufacturer. Ask us for the full data sheet.
Elastomers and silicone 3
Loctite 3D IND475Soft gaskets and seals, Shore 48A
Soft elastomer with resilience, snap-back and tear resistance.
Common applications
- Soft gaskets and seals
- Lattice structures
- Functional prototypes
Key properties
- Tensile strength
- 3.2 MPa
- Elongation at break
- 140%
- Shore hardness
- 48 A
Typical values from the manufacturer. Ask us for the full data sheet.
Loctite 3D MED414Skin-contact medical elastomer, Shore 50A
Soft elastomer with excellent elongation and tear strength. Meets ISO 10993-5, -10 and -23 when processed in a validated workflow.
Common applications
- Custom-fit ear devices
- Wearables
- Skin-contact medical components
Key properties
- Tensile strength
- 2.5–2.8 MPa
- Elongation at break
- 170–190%
- Shore hardness
- About 50 A
- Tear strength
- 13.5–16 kN/m
Typical values from the manufacturer. Ask us for the full data sheet.
TrueSil X50100% silicone, Shore 48A
Printed true silicone: 100% silicone parts without molds.
Common applications
- Seals and gaskets
- Medical and wearable parts
- Soft-touch components
Key properties
- Shore hardness
- 48 A
Typical values from the manufacturer. Ask us for the full data sheet.
Dental 10
KeyModel Ultra (Ivory, Light Grey)Dental models
High-accuracy dental model resin in ivory and light grey.
Common applications
- Study and restorative models
- Orthodontic models
Key properties
Ask us for the full data sheet and test values for this material.
KeyOrtho ModelAligner thermoforming models
Model resin made to stand up to aligner thermoforming.
Common applications
- Clear aligner models
- Retainer models
Key properties
Ask us for the full data sheet and test values for this material.
KeyGuideSurgical guides
Rigid, clear resin for surgical guides.
Common applications
- Surgical and implant guides
Key properties
Ask us for the full data sheet and test values for this material.
KeySplint Hard ClearSplints and night guards
Hard, clear splint resin.
Common applications
- Occlusal splints
- Night guards
Key properties
Ask us for the full data sheet and test values for this material.
KeySplint Soft ClearFlexible splints
Flexible, clear splint resin that is comfortable to wear.
Common applications
- Flexible splints
- Night guards
Key properties
Ask us for the full data sheet and test values for this material.
NextDent Model (Sand)Matte natural dental models
Matte, natural sand-colored resin for dental models.
Common applications
- Study models
- Restorative models
Key properties
Ask us for the full data sheet and test values for this material.
NextDent Denture BaseDenture bases
Resin for printed denture bases.
Common applications
- Full and partial denture bases
Key properties
Ask us for the full data sheet and test values for this material.
printodent GR-14.2 denture HIHigh-impact denture base
High-impact denture base resin.
Common applications
- Denture bases
Key properties
Ask us for the full data sheet and test values for this material.
printodent GR-17.1 temporary (A2, B2)Temporary crowns and bridges
Resin for temporary crowns and bridges, in shades A2 and B2.
Common applications
- Temporary crowns
- Temporary bridges
Key properties
Ask us for the full data sheet and test values for this material.
printodent GR-19.1 OA MSIHard-elastic splints
Hard-elastic splint resin.
Common applications
- Occlusal splints
- Bite guards
Key properties
Ask us for the full data sheet and test values for this material.
Every resin on our DLP materials page also runs on HPS.
No materials match that search. Ask us about it — we can likely still print it.
Have a part ready to print?
Send your files and we'll quote it in the material that fits.
