Mobile LiDAR Mapping, Anywhere You Can Take It
Artec Jet is a mobile LiDAR mapping system that uses SLAM-based positioning and AI-assisted autonomy to capture sites, facilities, and infrastructure — including GPS-denied areas such as tunnels, mines, and building interiors.
It's built for digital twins, as-built documentation, volumetric measurement, change detection, and inspection across mining, AEC, defense, public safety, civil infrastructure, and oil and gas.
Dense, Accurate, Shadow-Free Coverage
Capture entire sites in a single pass, with live feedback along the way.
Up to 1.9 Million Points/s
Triple-return acquisition of up to 1,920,000 points per second over a 0.5–300 m LiDAR range.
±10 mm Mapping Accuracy
Mapping accuracy of ±10 mm indoors and underground and ±15 mm in general environments, with ±5 mm change detection.
360° × 290° Field of View
Wide coverage captures dense, shadow-free point clouds, and SLAM works without satellites or ambient light.
Models & Accessories
Artec Jet is offered as a single model, with optional accessories for each deployment.
Artec Jet
Best for: getting started with push-button mobile mapping.
- Artec Jet scanner
- Battery and charger
- Handle
- Cable bag and battery cable for walking scans
- Belt clip
- International power adapter set
- Quick start guide
Accessories
Best for: matching Jet to your site and workflow.
- Backpack and telescopic boom pole
- Magnetic and suction vehicle mounts
- Protective cage and cavity monitoring system mount
- Drone fitting kits, Long Range Radio, and tablet display kit
- RTK base stations and control point targets
- GoPro and colorization kit
Rugged, Autonomous, Ready for the Field
An IP65-rated body, 512 GB of onboard storage, and a live point cloud preview on a companion app keep crews productive on-site. When mounted on a drone, Jet adds omnidirectional collision avoidance, waypoint-based autonomous flight, and a return-to-base failsafe.
- IP65 rated, operating from −10°C to 45°C
- 512 GB storage — about 16 hours of sensor data
- Collision avoidance detects wire as small as 2 mm
Seven Deployment Modes
Carry It
Handheld, backpack, telescopic pole, and cage modes cover walkthroughs, tight corridors, vertical shafts, and voids.
Mount It
Drone, robot (such as Boston Dynamics Spot), and vehicle mounts extend reach to hazardous or hard-to-access areas.
Supported drones and autopilots include DJI M300, DJI M350, and Freefly Astro Max.
Processing with Artec Twins
From Raw Scan to Digital Twin
Artec Twins is the processing platform for the Jet workflow. Data from Artec Jet can be merged with scans from Artec Ray II and Leo, and exported as LAS, LAZ, PLY, or E57 point clouds.
Full Specifications
Mapping & Accuracy
| Mapping Method | SLAM-based LiDAR mapping, ±0.03% drift |
| LiDAR Sensing Range | 0.5–300 m |
| LiDAR Accuracy | ±10 mm |
| Mapping Accuracy (General) | ±15 mm |
| Mapping Accuracy (Indoor / Underground) | ±10 mm |
| Change Detection | ±5 mm |
| Field of View | 360° × 290° |
| Acquisition (Single Return) | Up to 640,000 points/s |
| Acquisition (Triple Return) | Up to 1,920,000 points/s |
| Laser Class | Class 1 (eye safe) |
Physical & Environmental
| Ingress Protection | IP65 |
| Operating Temperature | −10°C to 45°C |
| Weight | 1.57 kg |
| Power | 14–54 V, 64 W (battery or auxiliary) |
| Onboard Storage | 512 GB (about 16 hours) |
| Quick Release Mount | Yes |
| Deployment Modes | Handheld, backpack, drone, vehicle, cage, telescopic pole, robot |
| Max Travel Speed | Vehicle: 60 km/h • Flight above ground: 5 m/s • Flight underground: 2 m/s |
| Warranty | 2 years |
Drone Autonomy & Safety
| Pilot Assist Flight Modes | Non-GPS flight, position hold, assisted flight, collision avoidance, regulated flight speed |
| Autonomous Flight | Autonomous navigation to waypoints |
| Waypoint Types | 2D, 3D, planar, height |
| Navigation Modes | Guided exploration, local and global path planning |
| Collision Avoidance FOV | 360° × 360° |
| Collision Avoidance Range | 1.2–40 m |
| Minimum Obstacle Detection | ≥ 2 mm wire |
| Return-to-Home Trigger | Low battery or excessive dust |
| Supported Drones / Autopilots | DJI M300, DJI M350, Freefly Astro Max |
Output & Interfaces
| Point Cloud Formats | LAS, LAZ, PLY, E57 |
| Outputs | Full-resolution point cloud, decimated point cloud, trajectory file |
| Point Attributes | Intensity, range, time, return number, ring number, RGB / true color (optional) |
| Interfaces | Proprietary auxiliary port, USB, Wi-Fi (internal antenna) |
| Processing Software | Artec Twins |



